Nortel Networks 4050 Configuring links using the CLI, Cfg/domain 1/linkset linkset ID/link index

414Chapter 9 Customizing the portal and user logon

Configuring links using the CLI

To create and configure the links included in the linkset, use the following command:

/cfg/domain 1/linkset <linkset ID>/link <index>

where index is an integer in the range 1 to 256 that indicates the position of the link in the linkset.

When you first create the link, if you do not specify the index in the command, you will be prompted to enter the index or name. You must enter the index for the new link. You will then be prompted to enter the following parameters:

•link text — a string that displays on the portal Home tab as the clickable link text. You can later modify the text by using the text command on the Link menu.

•type — the link type (external or ftp). The default is external. After you enter the link type, you automatically enter a wizard to configure type-specific settings for the link. You can later relaunch the wizard to modify the settings. For more information about the settings, see “Configuring external link settings using the CLI” on page 415 or “Configuring FTP link settings using the CLI” on page 415.

The Link menu displays.

320818-A