Nortel Networks 4050 manual Interface fields

512Chapter 10 Configuring system settings

2Enter the interface information in the applicable fields. Table 100 describes the Interface configuration fields.

Table 100	Interface fields
Field		Description
Index		An integer in the range 1 to 252 that uniquely identifies the
		interface on the Nortel SNAS 4050.
		This field cannot be changed after the interface is added.
Ip Address		Sets the network address for the interface. (For Interface 1,
		the network address is the RIP.)
Gateway		Sets the default gateway address for the interface. The
		default gateway is the IP address of the interface on the
		core router that will be used for management traffic (such
		as requests to private authentication servers and DNS
		servers).
		The default gateway will be used only for Nortel
		SNAS 4050 domains that point to this interface. If no
		domain points to this interface, the specified gateway will
		be ignored.
Netmask		Sets the subnet mask for the interface.
VlanId		Specifies the VLAN tag if packets received by the interface
		are tagged with a specific VLAN tag ID.

320818-A