Nortel Networks 4050 manual Adding a Radius server, Add a Radius Server fields

280Chapter 6 Configuring authentication

The RADIUS Server Table allows you to manage additional RADIUS servers by performing any of the following procedures:

•“Adding a RADIUS server” on page 280

•“Reordering additional RADIUS servers” on page 281

•“Removing a RADIUS server” on page 281

Adding a RADIUS server

To add additional RADIUS servers for redundancy, perform the following steps:

1Select the Secure Access Domain > domain > AAA > Authentication > radius > Radius Servers tab.

The RADIUS Servers screen appears (see Figure 64 on page 279).

2Click Add.

The Add a Radius Server dialog box appears (see Figure 65).

Figure 65 Add a Radius Server

3Enter the RADIUS server information in the applicable fields. Table 43 describes the Add a RADIUS Server fields.

Table 43 Add a Radius Server fields

Field	Description
IP Address	Specifies the IP address of the RADIUS server.

320818-A