Nortel Networks 4050 manual Sys/adm/audit/ena command

866Appendix B Syslog messages

Table 204 Syslog messages in alphabetical order (Sheet 2 of 10)

Message	Severity	Type	Explanation
audit	EVENT	System	Sent when a CLI system administrator
		Control	enters, enters, exits or updates the CLI if
			audit logging is enabled using the /cfg/
			sys/adm/audit/ena command.
Bad CN supplied in server cert	INFO	Traffic	Malformed CN found in subject of the
<subject>		Processing	certificate supplied by the backend server.
Bad IP:PORT data <line> in hc	ERROR	Traffic	Bad ip:port found in health check script.
script		Processing	Please reconfigure the health script. This
			should normally be captured earlier by the
			CLI.
Bad regexp (<expr>) in health	ERROR	Traffic	Bad regular expression found in health
check		Processing	check script. Please reconfigure. This
			should normally be captured earlier by the
			CLI.
Bad script op found <script op>	ERROR	Traffic	Bad script operation found in health check
		Processing	script. Please reconfigure. This should
			normally be captured earlier by the CLI.
Bad string found <string>	ERROR	Traffic	Bad load balancing string encountered.
		Processing	This is normally verified by the CLI.
Can't bind to local address:	ERROR	Traffic	Problem encountered when trying to set up
<ip>:<port>: <reason>		Processing	virtual server on <ip>:<port>.
Config filesystem corrupt	ERROR	OS	Possible loss of configuration. Followed by
			the message Config filesystem re-initialized
			- reinstall required or Config filesystem
			restored from backup.
Config filesystem corrupt beyond	EMERG	OS	The system cannot boot, but stops with a
repair			single-user prompt. Reinstall in order to
			recover.
Config filesystem re-initialized -	CRITICAL	OS	Reinstall.
reinstall required
Config filesystem restored from	ERROR	OS	Loss of recent configuration changes.
backup
Connect failed: <reason>	ERROR	Traffic	Connect to backend server failed with
		Processing	<reason>.

320818-A