Nortel Networks manual Enabling SSH, Configuring the Nortel Snas 4050 pVIP subnet

Chapter 17 Configuration example 791

7“Configuring the NSNA ports” on page 792

8“Enabling NSNA globally” on page 792

Enabling SSH

Passport-8310:5#config bootconfig flags ssh true Passport-8310:5#config sys set ssh enable true Passport-8310:5#config load-module 3DES /flash/P83C2280.IMG

Note: You have the option of using the AES encryption module, instead of the 3DES module.

Configuring the Nortel SNAS 4050 pVIP subnet

Passport-8310:5#config nsna nsnas 10.40.40.0/24 add

Creating port-based VLANs

Passport-8310:5#config vlan 110 create byport 1 Passport-8310:5#config vlan 120 create byport 1 Passport-8310:5#config vlan 130 create byport 1 Passport-8310:5#config vlan 140 create byport 1

Configuring the VoIP VLANs

Passport-8310:5#config vlan 140 nsna color voip

Configuring the Red, Yellow, and Green VLANs

Passport-8310:5#config vlan 110 nsna color red filter-id 310

Passport-8310:5#config vlan 120 nsna color yellow filter-id 320 yellow-subnet-ip 10.120.120.0/24

Passport-8310:5#config vlan 130 nsna color green filter-id 330

Nortel Secure Network Access Switch 4050 User Guide