Nortel Networks 4050 manual Next steps, Export Local User Database fields

Chapter 6 Configuring authentication 313

2Enter the export information in the applicable fields. Table 55 describes the Export Local User Database fields.

Table 55 Export Local User Database fields

Field	Description
Protocol	Specifies the export protocol. Options are:
	•	ftp
	•	tftp
	•	sftp
	•	scp
	The default is ftp.
Host	Specifies the host name or IP address of the server.
Filename	Specifies the name of the database file on the server.
Pass Phrase/Key	Specifies the password key for user password protection.
	For a database file whose passwords were protected with a
	key when the file was exported, the key you must provide is
	the same as the password key provided at the time of
	export. If the file is not protected with a key, enter any
	characters (a minimum of four) when prompted.
Username	For FTP, SFTP, and SCP, the user name and password to
	access the file exchange server.
Password	For FTP, SFTP, and SCP, the user name and password to
	access the file exchange server.

3Click Apply on the toolbar to export the specified local user database.

Next steps

1Configure additional authentication methods, if desired (see “Configuring RADIUS authentication using the SREM” on page 271 or “Configuring LDAP authentication using the SREM” on page 282).

2Set the authentication order (see “Specifying authentication fallback order using the SREM” on page 314).

3Commit the changes (see “Saving authentication settings” on page 316).

Nortel Secure Network Access Switch 4050 User Guide