Nortel Networks 4050 manual Downloading files using the Srem

752Chapter 14 Maintaining and managing the system

The command resets the device to its factory default configuration. All

IP configuration is lost. The software itself remains intact. After executing the delete command, you can only access the device using a console connection and performing the initial setup.

If you receive a warning that the device you are trying to delete has no contact with any other master Nortel SNAS 4050 device in the cluster, also connect to the MIP and delete the Nortel SNAS 4050 device from the cluster by using the delete command on the System > Hosts screen.

The delete command on the Reboot/Delete ISD Options tab is primarily intended for when you want to delete a Nortel SNAS 4050 device in one of the following situations:

•The device has become isolated from the cluster,

•The device has been physically removed from the cluster without first executing the delete command on the System > Hosts screen.

Downloading files using the SREM

To download files to the Nortel SNAS 4050 using the SREM, select the File Download tab.

320818-A