Nortel Networks 4050 manual Removing SNMPv3 users, Configuring Snmp User Settings fields Sheet 2

646Chapter 12 Configuring SNMP

Table 136 User Settings fields (Sheet 2 of 2)

Field	Description
Authentication Protocol	Specifies the protocol to be used to authenticate the USM
	user. Valid options are:
	•	md5
	•	sha
Privacy Protocol	Specifies the protocol used for encryption. Valid options
	are:
	•	des
	•	aes

3Click Apply on the toolbar to send the current changes to the Nortel

SNAS 4050. Click Commit on the toolbar to save the changes permanently.

Removing SNMPv3 users

To delete an existing SNMPv3 user, perform the following steps:

1Select the System > Administrative > SNMP > SNMPv3 Users > SNMPv3 User Table tab.

The SNMPv3 User Table appears (see Figure 185 on page 641).

2Select a user from the SNMPv3 Users Table.

3Click Delete.

A dialog box appears for confirmation.

4Click Yes.

5Click Apply on the toolbar to send the current changes to the Nortel

SNAS 4050. Click Commit on the toolbar to save the changes permanently.

320818-A