Nortel Networks 4050 manual Customizing a component, WINNT%\xxx.dll

324Chapter 7 TunnelGuard SRS Builder

Customizing a component

When an SRS component is selected by clicking on it, you can customize it using the toolbar below the component table, as shown in Figure 83. To learn more about available customizations, see Table 63.

Figure 83 SRS Component table toolbar

Table 63 Component customization descriptions

Item	Description
Add OnDisk file as entry	Select a file from the local file system and
	add it as one component of the SRS, for
	example, a text configuration file or a DLL.
	This enables you to make an API call to a
	DLL, that is not yet loaded by TunnelGuard
	or the application.
Add selected memory	Add the selected memory module from
module as entry	current memory snapshot.
Add registry key entry	Add the registry key entry.
Delete entry	Delete the selected component.
Copy entry	Copy the selected component.
Paste entry	Paste component (from one SRS definition to
	another).
Customize path	Replace part of the path with a string of
	system environment variables. For example:
	%WINNT%\xxx.dll
Set version range	Specify a particular version or a version
	range for the selected component.
Set date/time range	Specify a last modified date/time of the
	component, or a date/time range.
Add/Remove Vendor API	Indicate if third party API calls will be made
call check	using this component to do further checking.
Modify registry entry	Modify the registry key entry.
Ignore hash checking	Ignore hash value checking for the selected
	SRS entry.

320818-A