Nortel Networks 4050 manual Adds a Radius audit server to the configuration. You

		Chapter 10 Configuring system settings 491
/cfg/sys/adm/audit/servers
followed by:
add <IPaddr> <port>	Adds a RADIUS audit server to the configuration. You
<shared secret>	are prompted to enter the following information:
	• IPaddr — the IP address of the audit server
	• port — the TCP port number used for RADIUS
		auditing. The default is 1813.
	•	shared secret — the password used to
		authenticate the Nortel SNAS 4050 to the audit
		server
	The system automatically assigns the next available
	index number to the server.
insert <index number>	Inserts a server at a particular position in the list of
<IPaddr>	RADIUS audit servers in the configuration.
	•	index number — the index number you want
		the server to have
	• IPaddr — the IP address of the audit server you
		are adding
	The index number you specify must be in use. The
	index numbers of existing servers with this index
	number and higher are incremented by 1.
move <index number>	Moves a server up or down the list of RADIUS audit
<new index number>	servers in the configuration.
	•	index number — the original index number of
		the server you want to move
	•	new index number — the index number
		representing the new position of the server in the
		list
	The index numbers of the remaining entries adjust
	accordingly.

Nortel Secure Network Access Switch 4050 User Guide