Nortel Networks 4050 manual Authentication menu commands local database

Chapter 6 Configuring authentication 263

•group name — the name of the group to which the specified user belongs. The group must exist in the Nortel SNAS 4050 domain. To view available group names, press TAB.

Note: The prompt implies that you can enter multiple group names for a user, but the Nortel SNAS 4050 does not allow membership in multiple groups. If you enter multiple group names, the first group name entered is the one that will be returned to the Nortel SNAS 4050 after authentication.

The Authentication menu displays.

Figure 56 shows sample output for the Local method for the

/cfg/domain 1/aaa/auth <auth ID> command and commands on the Authentication menu.

Figure 58 Authentication menu commands — local database

>>Main# /cfg/domain 1/aaa/auth

Enter auth id: (1-63) 4 Creating Authentication 4

Select one of radius, ldap or local: local

Auth name: local4

Entering: Local database menu

Enter user name: <username>

Enter passwd: <password>

Enter group names (comma separated): <group>

Leaving: Local database menu

---------------------------------------------------------

[Authentication 4 Menu]

type	- Set authentication mechanism
name	- Set auth	name
display	- Set auth	display name
radius	- RADIUS settings menu
adv	- Advanced	settings menu
del	- Remove Authentication

>> Authentication 4#

Nortel Secure Network Access Switch 4050 User Guide