Cisco Systems Cisco Wireless Controller Manual for 2500 Series WLC and Baud Rate Settings

Figure 2 shows the front panel and location of the ports and light-emitting diodes (LEDs) for the 2504 controller. Table 1 describes the components of the front panel.

Note It is expected that there will be small variations in LED color intensity and hue from unit to unit. This is within the normal range of the LED manufacturer’s specifications and is not a defect.

Figure 2 Front Panel and LEDs

CISCO 2500 Series WIRELESS CONTROLLER

				RESET	Model 2504
CONSOLE	1	2	3	4	PWR SYS	ALM
				RESET
CONSOLE	1	2	3-4 POE		PWR	ALM

282249

SYS

Table 1	WLC2504 Front Panel Component Descriptions
Callout		Port and LEDs	State and Description
CONSOLE		CPU console port	The CPU console port is an RS-232 port that supports
			a RJ-45 connector. At boot-up the controller configures
			the RS-232 port as a console port with default settings
			of 9600, N, 8, 1. The boot-loader supports baud rates
			of 1200, 2400, 4800, 9600, 19200, 38400, 57600, and
			115200. A default baud-rate recovery mechanism is not
			available; however the bootloader ensures that the
			stored baud rate setting matches one of the allowed
			values before setting the baud rate. If a nonstandard
			value is detected the baud rate will default to 9600.

5