Cisco Systems AIR-CT2504-5-K9, 2500 manual Mounting the Controller on a Wall Rack-Mount Brackets

Step 3 Place the switch on the table or shelf near an AC power source.

Note Allow 3 inches of space around the controller ventilation openings to prevent airflow restriction and overheating.

Step 4 After the controller is mounted on a shelf or desk, perform the following tasks to complete the installation:

•Connecting the Controller Console Port

•Securing the Power Adapter Cable

•Connecting to the Network

Step 5 For configuration instructions about using the CLI setup program, see the “Running the Bootup Script and Power-On Self Test” section on page 23.

Mounting the Controller on a Wall (Rack-Mount Brackets)

The controller can be mounted on a wall using an optional rack-mount bracket kit that is not included with the controller. You can order a kit with 19-inch rack mounting brackets and hardware from Cisco. The kit part number is AIR-CT2504-RMNT.

Warning	Read the wall-mounting carefully before beginning installation. Failure to use the
	correct hardware or to follow the correct procedures could result in a hazardous
	situation to people and damage to the system. Statement 378

To mount the controller on a wall using rack-mount brackets, follow these steps:

Step 1 Attach the 19-inch brackets to each side of the 2504 controller as shown in Figure 5 with #10-32 flat head screws provided in the kit.

13