![](/images/new-backgrounds/1190696/19069645x1.webp)
1
2
Security clip secured with screw | 3 | Power plugged into the POWER 48VDC |
| port. | |
AC/DC power adapter cable |
|
|
|
|
|
Installing a Security Lock
The controller has a security slot on the back panel. You can install an optional
4Running the Bootup Script and Power-On Self Test
When you plug the controller into an AC power source, the bootup script initializes the system, verifies the hardware configuration, loads its microcode into memory, verifies its operating system software load, and initializes itself with its stored configurations. Before performing this test, you should have connected your PC to the CLI console on the controller as described in the “Connecting the Controller Console Port” section on page 21.
To run the bootup script and conduct the
Step 1 Plug the external power supply into the power jack on the back of the controller.
Step 2 Plug a
Note If you wish to run a previous release of the controller code, press Esc when the boot loader prompt appears. The Bootloader Options menu appears.
Note When the controller receives power, the green front panel Power LED lights. If the Power LED does not light, make sure that the electrical outlet is supplying power and that the power connections to the controller are correct.
23