Cisco Systems AIR-CT2504-5-K9, 2500 manual Are provided to ensure your safety

Step 6 For configuration instructions about using the CLI setup program, see the “Running the Bootup Script and Power-On Self Test” section on page 23.

Mounting the Controller in a Rack

To mount the 2504 controller in a 19-inch equipment rack, you can order an optional Optional Rack Mount kit (AIR-CT2504-RMNT).

Warning	To prevent bodily injury when mounting or servicing this unit in a rack, you must take
	special precautions to ensure that the system remains stable. The following guidelines
	are provided to ensure your safety:
	• This unit should be mounted at the bottom of the rack if it is the only unit in the rack.
	• When mounting this unit in a partially filled rack, load the rack from the bottom to the
	top with the heaviest component at the bottom of the rack.
	• If the rack is provided with stabilizing devices, install the stabilizers before mounting
	or servicing the unit in the rack. Statement 1006

To install the controller in a rack, follow these steps.

Step 1 Attach the 19-inch brackets to each side of the controller as shown in Figure 9 with #10-32 flat head screws provided in the kit.

18