Step 5 Continue booting the controller or press Esc to access the following menu:
1.Run primary image (7.0.114.76) - Active
2.Run backup image (7.0.114.75)
3.Change active boot image
4.Clear configuration
5.Format FLASH Drive
6.Manually update images
Enter selection:
If you did not press Esc, the boot process continues and takes two to three minutes. Do not reboot the controller until the user login prompt appears.
Loading primary image (7.0.114.76) 100%
31427987 bytes read Launching images...
init started: BusyBox v1.6.0
starting pid 672, tty '': '/etc/init.d/rcS' type = block
level = header compress = none
ifconfig: SIOCGIFFLAGS: No such device Detecting Hardware ...
Installing
starting pid 805, tty '/dev/ttyS0': '/usr/bin/gettyOrMwar' Cryptographic library
XML config selected Validating XML configuration octeon_device_init: found 1 DPs /dev/fpga: No such device or address readCPUConfigData: cardid 0x6060001
Cisco is a trademark of Cisco Systems, Inc.
Software Copyright Cisco Systems, Inc. All rights reserved. Cisco AireOS Version 7.0.114.76
Firmware Version PIC 14.0 Initializing OS Services: ok Initializing Serial Services: ok Initializing Network Services: ok Initializing Licensing Services: ok Starting ARP Services: ok Starting Trap Manager: ok
Starting Network Interface Management Services: ok
Starting System Services: ok
Starting Fastpath Hardware Acceleration: ok
Starting Fastpath Console redirect : ok
27
