Nortel Networks 4050 manual Managing user groups using the Srem, Click Set Pass Phrase

Chapter 8 Managing system users and groups 381

2Enter the PassPhrase information in the applicable fields. Table 73 describes the Set Certificate Export PassPhrase fields.

Table 73 Set Certificate Export PassPhrase fields

Field	Description
Enter New Pass Phrase	Sets the pass phrase. Must be at least four characters.
Re-enter New Pass Phrase	Confirms the pass phrase.

3Click Set Pass Phrase.

4Click Apply on the toolbar to send the current changes to the Nortel

SNAS 4050. Click Commit on the toolbar to save the changes permanently.

Managing user groups using the SREM

All users must belong to at least one group. Only an administrator user can add a new user account to the system, but any user can grant an existing user membership in a group to which the granting user belongs.

By default, the administrator user is a member of all three built-in groups (admin, oper, certadmin) and can therefore add a new user to any of these groups. However, a certificate administrator, who is a member of the certadmin group only, can add an existing user to the certadmin group only.

If a user belongs to only one group and you want to change the user’s group membership, add the user to the new group first, and then remove the user from the old one.

Nortel Secure Network Access Switch 4050 User Guide