Nortel Networks 4050 manual Configuring date and time settings using the CLI, Add IPaddr mask

Chapter 10 Configuring system settings 475

The Access List menu displays.

The Access List menu includes the following options:

/cfg/sys/accesslist followed by:

list	Displays the network address and network mask for all
	entries in the Access List, by index number.
del <index number>	Removes the specified entry from the list.
	• index number is the identification number
	automatically assigned to the entry when you
	added the entry to the list.
	To view the index numbers of all configured Access List
	entries, use the list command.
add <IPaddr> <mask>	Adds an entry to the Access List. Only those machines
	listed will be allowed to access the Nortel SNAS 4050
	through Telnet or SSH.
	• IPaddr is the IP address of the host to be allowed
	access.
	• mask is the subnet mask. You can set the mask to
	specify a single machine or a range of machines on
	a specific network.
	An index number is automatically assigned to the entry.

Configuring date and time settings using the CLI

To configure date and time settings for the cluster, use the following command:

/cfg/sys/time

The Date and Time menu displays.

Nortel Secure Network Access Switch 4050 User Guide