42Chapter 1 Overview

Figure 2 illustrates a two-armed configuration.

Figure 2 Two-armed configuration

Client portal interface (2)

NSNAS

Management interface (1)

192.168.128.11 (RIP 2 [host]) 2

1 10.1.0.11 (MIP [management])

 

192.168.128.100 (pVIP [portal])

 

10.1.0.12 (RIP 1 [host])

Internet

 

 

Default gateway

 

192.168.128.1

 

 

 

Network access device

 

 

 

 

 

 

 

Endpoint Management

device station

Nortel SNA configuration and management tools

You can use a number of device and network management tools to configure the Nortel SNAS 4050 and manage the Nortel SNA solution:

•Command Line Interface (CLI)

You must use the CLI to perform initial setup on the Nortel SNAS 4050 and to set up the Secure Shell (SSH) connection between the Nortel SNAS 4050 and the network access devices, and between the Nortel SNAS 4050 and the GUI management tool. You can then continue to use the CLI to configure and manage the Nortel SNAS 4050, or you can use the GUI.

The configuration chapters in this User Guide describe the specific CLI commands used to configure the Nortel SNAS 4050. For general information about using the CLI, see Chapter 16, “The Command Line Interface,” on page 769.

320818-A

Page 41 Page 43
Page 42
Image 42
Nortel Networks 4050 manual Nortel SNA configuration and management tools, Illustrates a two-armed configuration
Page 41 Page 43
Top Page Image Contents