Nortel Networks 4050 manual Using a submenu name as a command argument, Configuration# cur sys

Appendix A CLI reference 809

•To display the active menu:

—Ensure that the command line is blank.

—At the menu prompt, press the Tab key.

Using a submenu name as a command argument

To display the properties related to a specific submenu, you can include the submenu name as an argument to the cur command (at a menu prompt one level up from the desired submenu information).

For example, to display system information at the Configuration menu prompt, without descending into the System menu (/cfg/sys), use the following command:

>>Configuration# cur sys

>>Configuration# cur sys System:

Management IP (MIP) address = 192.168.128.211

iSD Host 1:

Type of the iSD = master

IP address = 192.168.128.213 License =

IPSEC user sessions: 250 Secure Service Partitioning PortalGuard

TPS: unlimited

SSL user sessions: 250

Default gateway address = 192.168.128.3 Ports = 1 : 2

Hardware platform = 3070

Host Routes:

No items configured

Host Interface 1:

IP address = 192.168.128.213

Network mask = 255.255.255.0

VLAN tag id = 0

Mode = failover

Primary port = 0

Interface Ports: 1

Host Port 1:

Autonegotiation = on

Nortel Secure Network Access Switch 4050 User Guide