Nortel Networks 4050 manual Snmp Configuration fields, Sonmp

Chapter 12 Configuring SNMP 633

2Enter the SNMP Configuration information in the applicable fields. Table 132 describes the SNMP Configuration fields.

Table 132 SNMP Configuration fields

Field	Description
SONMP	When checked, enables support for SynOptics Network
	Management Protocol (SONMP) network topology
	information. The default is disabled (unchecked).
System Contact	Designates a contact person for the managed Nortel
	SNAS 4050 cluster, together with information about how to
	contact this person.
Authentication Traps	When checked, enables generating authentication failure
Enabled	traps. The default is disabled (unchecked).
SNMP Enabled	When checked, enables network management using
	SNMP. The default is enabled.
Versions	Specifies the SNMP versions allowed. Check one or more
	of the following options: v1 (SNMP version 1), v2c (SNMP
	version 2c), v3 (SNMP version 3).
	The default is all versions (v1, v2c, v3).
Read	Specifies the monitor community name that grants read
	access to the MIB. If you do not specify a monitor
	community name, read access is not granted. The default
	monitor community name is public.
Write	Specifies the control community name that grants read and
	write access to the MIB. If you do not specify a control
	community name, neither read nor write access is granted.
Trap	Specifies the trap community name that accompanies trap
	messages sent to the SNMP manager. If you do not specify
	a trap community name, the sending of trap messages is
	disabled. The default trap community name is trap.

3Click Apply on the toolbar to send the current changes to the Nortel

SNAS 4050. Click Commit on the toolbar to save the changes permanently.

Nortel Secure Network Access Switch 4050 User Guide