Nortel Networks 4050 manual Configuring Snmp settings using the CLI

620Chapter 12 Configuring SNMP

Command	Parameter
/cfg/sys/adm/snmp/event	addmonitor [<options>] -b <name>
	<OID> <op> <value>
	addmonitor [<options>] -t <name>
	<OID> <value and event>
	addmonitor [<options>] -x <name>
	<OID> [presentabsent changed]
	delmonitor <name>
	addevent [-c <comment>] <name>
	<notification> [<OID...>]
	delevent <name>
	list

Configuring SNMP settings using the CLI

To configure SNMP management of the Nortel SNAS 4050 cluster, use the following command:

/cfg/sys/adm/snmp

The SNMP menu displays.

The SNMP menu includes the following options:

/cfg/sys/adm/snmp

followed by:

ena

dis

Enables network management using SNMP. The default is enabled.

Disables network management using SNMP.

320818-A