Nortel Networks 4050 manual About alarm messages, Lists the System Control Process Info messages

854Appendix B Syslog messages

Table 191 lists the System Control Process INFO messages.

Table 191 System control process messages — INFO

Message	Category	Explanation/Action
System started [isdssl-<version>]	INFO	Sent whenever the system control process has been
		(re)started.

About alarm messages

Alarms are sent at a syslog level corresponding to the alarm severity shown in Table 192.

Table 192 Alarm severity and syslog level correspondence

Alarm severity	Syslog level
CRITICAL	ALERT
MAJOR	CRITICAL
MINOR	ERROR
WARNING	WARNING
*	ERROR

Alarms are formatted according to the following pattern:

Id: <alarm sequence number>

Severity: <severity>

Name: <name of alarm>

Time. <date and time of the alarm>

Sender: <sender, e.g. system or the Nortel SNAS 4050 device’s IP address>

Cause: <cause of the alarm>

Extra: <additional information about the alarm>

When an alarm is cleared, one of the following messages is sent:

•Alarm Cleared Name=“<Name>” Id= “<ID>” Sender=“<Sender>”

•Alarm Cleared Id=“<ID>”

320818-A