Nortel Networks 4050 manual Configuring the domain using the Srem, Vendorid, Vendortype

150Chapter 4 Configuring the domain

The VPN Attribute menu includes the following options:

/cfg/domain #/aaa/radacct/vpnattribu followed by:

vendorid	Corresponds to the vendor-specific attribute used by
	the RADIUS accounting server to identify accounting
	information from the Nortel SNAS 4050 domain.
	The default Vendor-Id is 1872 (Alteon).
vendortype	Corresponds to the Vendor-Type value used in
	combination with the Vendor-Id to identify accounting
	information from the Nortel SNAS 4050 domain.
	The default Vendor-Type value is 3.

Configuring the domain using the SREM

To configure the domain, select the Secure Access Domain > Secure Access Domain Table tab. The Secure Access Domain Table screen appears (see Figure 19 on page 152), displaying a list of existing domains.

From the Secure Access Domain screens, you can configure and manage the following:

•domain parameters such as name and portal IP address (pVIP) (see “Configuring domain parameters using the SREM” on page 164)

•Authentication, Authorization, and Accounting (AAA) features

•for authentication, see “Configuring authentication” on page 233

•for authorization, see “Configuring groups and profiles” on page 191 and “Configuring the TunnelGuard check using the SREM” on page 168

•for accounting, see “Configuring RADIUS accounting using the SREM” on page 183

•the SSL server used for the domain portal (see “Configuring the SSL server using the SREM” on page 174)

•SSL trace commands

•SSL settings

•logging traffic with syslog messages

320818-A