Nortel Networks 4050 manual Add variable name, Ldap attribute, Prefix suffix, Variable name

		Chapter 6 Configuring authentication 259
/cfg/domain 1/aaa/auth #/ldap/ldapmacro
followed by:
add <variable name>	Adds an LDAP macro to the configuration. You are
<LDAP attribute>	prompted to enter the following information:
[<prefix>] [<suffix>]	•	variable name — the name of the variable.
	•	LDAP attribute — the LDAP user attribute
		whose value will be retrieved from the client’s
		LDAP/Active Directory user record.
	• prefix — if the value string of the LDAP attribute
		is long and you wish to extract only part of it, the
		values at the start of the string that you want to
		ignore. Combine with a suffix if the value you want
		is in the middle of the string.
	• suffix — if the value string of the LDAP attribute
		is long and you wish to extract only part of it, the
		values at the end of the string that you want to
		ignore. Combine with a prefix if the value you want
		is in the middle of the string.
	The system automatically assigns the next available
	index number to the macro.
insert <index number>	Inserts a macro at a particular position in the list of
<variable name>	LDAP macros in the configuration.
	•	index number — the index number you want
		the macro to have
	•	variable name — the LDAP macro you are
		adding
	The index number you specify must be in use. The
	index numbers of existing macros with this index
	number and higher are incremented by 1.
move <index number>	Moves a macro up or down the list of macros in the
<new index number>	configuration.
	•	index number — the original index number of
		the macro you want to move
	•	new index number — the index number
		representing the new position of the macro in the
		list
	The index numbers of the remaining entries adjust
	accordingly.

Nortel Secure Network Access Switch 4050 User Guide