Nortel Networks 4050 manual Add a Switch fields

92Chapter 3 Managing the network access devices

The Switches screen appears (see “Switch Configuration screen” on page 116).

2Click Add.

The Add a Switch dialog box appears (see Figure 6).

Figure 6 Add a Switch

3Enter the network access device information in the applicable fields. Table 3 describes the Add a Switch fields.

Table 3 Add a Switch fields

Field	Description
Index	Specifies an integer that uniquely identifies the network
	access device in the Nortel SNAS 4050 domain.
Name	Specifies a string that identifies the switch on the Nortel
	SNAS 4050.
	The maximum length of the string is 255 characters. After
	you have defined a name for the switch, you can use either
	the switch name or the switch ID to access the network
	access device.
Type	Specifies the type of network access device. The options
	are ERS8300 and ERS5500.
IP Address	Specifies the network access device IP address.
Red VLAN ID	Specifies the VLAN ID of the Red VLAN configured on the
	network access device

320818-A