Nortel Networks 4050 manual Deleting a domain using the Srem

Chapter 4 Configuring the domain 163

If there are no problems, then a dialog appears to indicate that the wizard is processing the information. The wizard creates the domain, and assigns the following default VLAN IDs:

•Green VLAN = VLAN ID 110

•Yellow VLAN = VLAN ID 120

You can change the VLAN mappings when you add or modify the network access devices (see “Managing the network access devices” on page 71).

15Click Close to exit the wizard.

16Click Apply on the toolbar to send the current changes to the Nortel

SNAS 4050. Click Commit on the toolbar to save the changes permanently.

Deleting a domain using the SREM

To delete a domain, perform the following steps:

1Select the Secure Access Domain > Secure Access Domain Table tab.

The Export Content screen appears (see “Secure Access Domain Table screen” on page 152).

2Select the domain from the Secure Access Domain Table list.

3Click Delete.

A dialog box appears to confirm this domain is to be deleted.

4Click Yes.

The domain is removed from the Secure Access Domain Table.

5Click Apply on the toolbar to send the current changes to the Nortel

SNAS 4050. Click Commit on the toolbar to save the changes permanently.

Nortel Secure Network Access Switch 4050 User Guide