Nortel Networks 4050 manual Syslog messages in alphabetical order, Nsnas Info Sheet 2

		Appendix B Syslog messages 865
Table 203 NSNAS — INFO (Sheet 2 of 2)
Message	Category	Explanation/Action
tunnelguard: user <username>[<pVIP>] –	INFO	TunnelGuard applet report: The user with user
SRS check failed, restrictingSRS – <SRS		name <username>, logged on to the Nortel
rule> <comment> – <item> – <reason>		SNAS 4050 portal with portal Virtual IP
		address <pVIP>, has failed the SRS rule
		check, and access is restricted in accordance
		with the behavior configured for SRS rule
		failure. To identify the rule, the message
		includes the <SRS rule> name and additional
		<comment> information defined for the rule.
		The message also includes the element of the
		SRS rule (<item>) that failed and the
		<reason> (for example, file not found).
tunnelguard: user <username>[<pVIP>] –	INFO	TunnelGuard applet report: The user with user
SRS checks ok, open session		name <username>, logged on to the Nortel
		SNAS 4050 portal with portal Virtual IP
		address <pVIP>, has passed the SRS rule
		check and is authorized to start a session in a
		Green VLAN.

Syslog messages in alphabetical order

Table 204 lists the syslog messages in alphabetical order.

Table 204 Syslog messages in alphabetical order (Sheet 1 of 10)

Message	Severity	Type	Explanation
[A:B:C:D] NSNA portdown	INFO	NSNAS	Domain A, switch B, unit C, port D Ethernet
			link is down.
[A:B:C:D] NSNA portup	INFO	NSNAS	Domain A, switch B, unit C, port D Ethernet
			link is up.
accept() turned off (<nr>) too	INFO	Traffic	The Nortel SNAS 4050 has temporarily
many fds		Processing	stopped accepting new connections. This
			will happen when the Nortel SNAS 4050 is
			overloaded. It will start accepting
			connections once it has finished
			processing its current sessions.
Application filesystem corrupt -	CRITICAL	OS	Reinstall.
reinstall required

Nortel Secure Network Access Switch 4050 User Guide