Nortel Networks 4050 manual Adding a Radius authentication server, Add Radius Server fields

566Chapter 10 Configuring system settings

Adding a RADIUS authentication server

To add a new RADIUS authentication server, perform the following steps:

1Select the System > Administrative > Radius Authentication > Radius Servers tab.

The Radius Server Table appears (see Figure 164 on page 565).

2Click Add.

The Add Radius Server dialog box appears (see Figure 165).

Figure 165 Add Radius Server

3Enter the RADIUS server information in the applicable fields. Table 119 describes the Add Radius Server fields.

Table 119 Add Radius Server fields

Field	Description
IP Address	Specifies the IP address of the RADIUS authentication
	server.
Port	Specifies the TCP port number used for RADIUS
	authentication. The default is 1813.
Secret Key	Specifies the password used to authenticate the Nortel
	SNAS 4050 to the authentication server.

4Click Add.

The RADIUS server appears in the table.

5Click Apply on the toolbar to send the current changes to the Nortel

SNAS 4050. Click Commit on the toolbar to save the changes permanently.

320818-A