Nortel Networks 4050 manual Removing an existing RSA server, Removing the RSA node secret

542Chapter 10 Configuring system settings

Removing an existing RSA server

To remove an existing RSA server, perform the following steps.

1Select the System > Servers > RSA Server Table tab. The RSA Server Table appears (see Figure 152).

2Select the RSA server entry to remove from the RSA Server Table.

3Click Delete.

A dialog box appears for confirmation.

4Click Yes.

The RSA server entry disappears from the RSA Server Table.

5Click Apply on the toolbar to send the current changes to the Nortel

SNAS 4050. Click Commit on the toolbar to save the changes permanently.

Removing the RSA node secret

You can remove the RSA node secret, if necessary. Authentication will then fail until the Node secret created check box is unchecked in the Edit Agent Host window on the RSA server.

To remove the RSA node secret, perform the following steps:

1Select the System > Servers > RSA Server Table tab.

The RSA Server Table appears (see Figure 152 on page 540).

2Select the RSA server entry from the RSA Server Table.

320818-A