Nortel Networks 4050 manual Redirect URL, Logintext text

Chapter 9 Customizing the portal and user logon 407

/cfg/domain 1/portal followed by:

redirect <URL>	Sets the URL to which clients are automatically
	redirected after authentication by the portal.
	• URL is the URL to which to direct the client,
	prefixed by the portal address
	For example, if the portal address is
	nsnas.example.com and you want to redirect clients
	automatically to inside.example.com, the URL
	parameter is:
	https://nsnas.example.com/http/inside.example.com
	Alternatively, you can use the <var:portal> macro
	to represent the portal address.
	With redirection configured, the client will not be able to
	access tabs on the portal page.
	To remove redirection, replace the previously specified
	URL with an empty string by pressing Enter at the URL
	prompt.
	For more information about using macros in URLs, see
	“Macros” on page 395. For more information about
	redirecting clients to internal sites, see “Automatic
	redirection to internal sites” on page 396.
logintext <text>	Specifies custom text to be displayed on the portal
	logon page.
	• text is an ordinary text string or HTML code
	You can type in the text or paste it in at the prompt. To
	signal the end of the string, press Enter to create a
	new line, type an ellipsis (...), and then press Enter
	again.

iconmode cleanfancy Specifies the mode for the icons representing portal links (for example, file server links).

•clean displays simple icons using a single color (color3)

•fancy displays displays multicolored, shaded, and animated icons

The default value is fancy.

For more information about linksets and links, see “Linksets and links” on page 394. For information about configuring links, see “Configuring links using the CLI” on page 413.

For information about customizing the colors used on the portal page, see “Changing the portal colors using the CLI” on page 408.

Nortel Secure Network Access Switch 4050 User Guide