Nortel Networks 4050 Removing an Access List entry, Add Access Host dialog box appears see Figure

Chapter 10 Configuring system settings 527

The Add Access Host dialog box appears (see Figure 144).

Figure 144 Add Access Host

3Enter the access host information in the fields provided. Table 104 describes the Add Access Host fields.

Table 104 Add Access Host fields

Field	Description
IP Address	Specifies the IP address of the host to be allowed access.
Network mask	Specifies the subnet mask. You can set the mask to specify
	a single machine or a range of machines on a specific
	network.

4Click Add.

The new host appears in the table. An index number is automatically assigned to the entry.

5Click Apply on the toolbar to send the current changes to the Nortel

SNAS 4050. Click Commit on the toolbar to save the changes permanently.

Removing an Access List entry

To remove an existing entry from the access list, perform the following steps:

1Select the System > Access List tab.

The Access List Table appears (see Figure 143 on page 526).

2Select an entry from the Access List Table to remove.

3Click Delete.

A confirmation dialog appears.

Nortel Secure Network Access Switch 4050 User Guide