Nortel Networks 4050 manual Configuring client filters using the Srem, Group Configuration fields

Chapter 5 Configuring groups and profiles 213

2Enter the group information in the applicable fields. Table 32 describes the group Configuration fields.

Table 32 Group Configuration fields

Field	Description
Group ID (Index)	An integer in the range 1 to 1023 that uniquely
	identifies the group in the Nortel SNAS 4050 domain.
	This value cannot be changed after a group is created.
Group Name	A string that uniquely identifies the group on the Nortel
	SNAS 4050. The group name must match a group
	name used by the authentication services.
Maximum Login Sessions	The maximum number of simultaneous portal or Nortel
	SNAS 4050 sessions allowed for each member of the
	group.
	The default is 0 (unlimited).
Tunnel Guard SRS Rule	Specifies the preconfigured TunnelGuard SRS rule to
	apply to the group.
	For information about configuring the SRS rules using
	the SREM, see “TunnelGuard SRS Builder” on
	page 317.
Comment	A comment related to this group.

3Click Apply on the toolbar to send the current changes to the Nortel

SNAS 4050. Click Commit on the toolbar to save the changes permanently.

Configuring client filters using the SREM

This section contains the following topics:

•“Adding a client filter” on page 214

•“Modifying a client filter” on page 217

Nortel Secure Network Access Switch 4050 User Guide