Nortel Networks 4050 manual Configuring syslog servers using the CLI, Syslog Servers menu displays

Chapter 10 Configuring system settings 481

The RSA Servers menu includes the following options:

/cfg/sys/rsa followed by:

rsaname <name>	Sets the symbolic name of the RSA server.
import <protocol>	Imports a copy of the sdconf.rec file from the
<server> <filename>	specified TFTP/FTP/SCP/SFTP server.
[<FTP user name> <FTP	• protocol is the import protocol. Options are
password>]	tftpftpscpsftp.
	• server is the host name or IP address of the
	server.
	• filename is the name of the sdconf.rec file
	on the server.
	The sdconf.rec file is a configuration file that
	contains critical RSA ACE/Server information. Contact
	your RSA ACE/Server administrator to obtain the file
	and make it available on the specified
	TFTP/FTP/SCP/SFTP server.
rmnodesecr	Removes the RSA node secret, if necessary.
	Authentication will then fail until the Node secret
	created check box is unchecked in the Edit Agent
	Host window on the RSA server.
del	Deletes the current RSA server information.

Configuring syslog servers using the CLI

The Nortel SNAS 4050 software can send log messages to specified syslog hosts.

For descriptions of the log messages that the Nortel SNAS 4050 can send to a syslog host, see Appendix B, “Syslog messages,” on page 851.

To configure syslog servers for the cluster, use the following command:

/cfg/sys/syslog

The Syslog Servers menu displays.

Nortel Secure Network Access Switch 4050 User Guide