Nortel Networks 4050 manual Viewing and installing host licenses, Host fields

500Chapter 10 Configuring system settings

2Enter the host information in the applicable fields. Table 96 describes the Host fields.

Table 96 Host fields

Field	Description
Index	An integer automatically assigned to the host when you
	perform initial setup on the Nortel SNAS 4050 device.
IP Address	Sets the Real IP address (RIP) for Interface 1 on the
	device. The RIP is the Nortel SNAS 4050 device host IP
	address for network connectivity and must be unique on
	the network. For more information, see “About the IP
	addresses” on page 51.
	Changing the RIP does not affect the MIP for the cluster.
System Name	Assigns a name to the managed Nortel SNAS 4050 host.
	The name is a useful mnemonic when managing the Nortel
	SNAS 4050 using SNMP.
System Location	Identifies the physical location of the managed Nortel
	SNAS 4050 host. The location description is a useful
	mnemonic when managing the Nortel SNAS 4050 using
	SNMP.
IP Gateway	Sets the default gateway address for the device. The
	default gateway is the IP address of the interface on the
	core router that will be used if no other interface is
	specified.
	To specify a default gateway for Interface 1 traffic, use
	Interface configuration screen (see “Configuring host
	interfaces using the SREM” on page 508).
HW Platform	Displays the hardware platform of the Nortel SNAS 4050
	device.

3Click Apply on the toolbar to send the current changes to the Nortel

SNAS 4050. Click Commit on the toolbar to save the changes permanently.

Viewing and installing host licenses

There are three ways to view installed licenses using the SREM:

•“Viewing global licenses for all hosts” on page 501

•“Viewing per domain licenses for all hosts” on page 503

•“Viewing installed licenses for a particular host” on page 505

320818-A