Nortel Networks 4050 Adding new user accounts, Click Add Add a User dialog box appears see Figure

372Chapter 8 Managing system users and groups

Only the admin user can delete users from the system. Of the three built-in users (admin, oper, and root), only the oper user can be deleted.

Note: When you delete a user, the user’s group assignment is also deleted. If you are deleting a user who is the sole member of a group, none of the remaining users on the system can then be added to that group. Existing users can only be added to a group by a user who is already a member of that group. Before deleting a user, verify that the user is not the sole member of a group.

To manage Nortel SNAS 4050 users, select from the following tasks:

•“Adding a new user” on page 360

•“Removing existing user accounts” on page 373

Adding new user accounts

To add additional user accounts, perform the following steps:

1Select the System > Manage Users > User Table tab. The User Table appears (see Figure 96).

2Click Add.

The Add a User dialog box appears (see Figure 97).

Figure 97 Add a User

320818-A