Nortel Networks 4050 manual Adding an NTP server, Select the System Date and Time tab

530Chapter 10 Configuring system settings

Adding an NTP server

To add an additional NTP server, perform the following steps:

1Select the System > Date and Time tab.

The Date and Time screen appears (see Figure 145 on page 528).

2Click Add.

The Add NTP Server dialog box appears (see Figure 146).

Figure 146 Add NTP Server

3Enter the NTP Server information in the applicable fields. Table 106 describes the Add NTP Server fields.

Table 106 Add NTP Server fields

Field	Description
IP Address	Specifies the IP address of an NTP server. An index
	number is automatically assigned to the server.

4Click Add.

The NTP server appears in the NTP Server Table.

5Click Apply on the toolbar to send the current changes to the Nortel

SNAS 4050. Click Commit on the toolbar to save the changes permanently.

320818-A