Amber light indicates it is time to change the filter and/or battery.

Installation Instructions

INDICATOR LIGHT

The Faucet Mount FIlter is equipped with indicator lights that tell you when it is time to change the filter and battery.

Green light

Green light flashes to

flashes to

indicate you are using

indicate you

Filtered Stream.

are using

 

Filtered

 

Spray.

 

The amber light will flash one time every few seconds to remind you that it is time to change the filter.

The amber light will flash three quick flashes every few seconds when it is time to change the battery and filter.

FILTER CARTRIDGE REPLACEMENT

1Turn off the water to the filtration system.

2Remove the cap of the filtration system by inserting a small coin or screwdriver on the back of the system and pry to remove cap.

Insert a small coin or screwdriver on the back and pry to remove cap.

3Remove the old filter cartridge by turning counterclockwise. Be sure to support the faucet and the filter housing during the filter removal to avoid damage. Dispose of the old filter.

NOTE: Some water may drip from the system during filter cartridge removal.

Turn filter counterclockwise to remove.

FILTER CARTRIDGE REPLACEMENT (CONT.)

4Remove the packaging and label at the bottom of the new filter. Then install the new filter. Be sure to support the filter housing in your hand and press the new filter into the housing firmly, then turn the filter clockwise until hand-tight. Continue to turn until the tab lines up with the non-filtered icon as shown below:

Twist filter clockwise to install.

Tab on filter will line up

with the

Non-filtered

icon when the filter is fully installed.

5Align the cap with the filter housing (lights in the front) and press it down into place.

NOTE: The cap is designed to fit on the filter housing only one way.

6Slowly turn on the water supply and check for leaks.

NOTE: If leak occurs at filter, turn cartridge to make sure it is fully sealed.

7With the cold water fully open, turn the selector dial to “Filtered Water” to begin flushing the system. Flush the new filter cartridge for

10 minutes to remove any harmless carbon fines that may be in the system.

BATTERY REPLACEMENT

1Turn off the water to the filtration system.

2Remove the cap of the filtration system by inserting a small coin or screwdriver on the back of the system and pry to remove cap.

Insert a small coin or screwdriver on the back and pry to remove cap.

3See Steps 4–8 in the Initial Set-Upsection for proper battery replacement instructions.

4

Page 3 Page 5
Page 4
Image 4
GE GXFM07HWW, GXFM07HBL installation instructions Indicator Light, Filter Cartridge Replacement, Battery Replacement
Page 3 Page 5

GXFM07HWW, GXFM07HBL specifications

The GE GXFM07HBL and GXFM07HWW are compact yet efficient countertop ice makers designed to meet both residential and light commercial needs for ice production. These models stand out among ice makers due to their sleek aesthetics, innovative features, and user-friendly operation.

One of the key features of the GXFM07HBL and GXFM07HWW is their rapid ice-making capability. These machines can produce up to 28 pounds of bullet ice per day, ensuring that you have an ample supply of ice for various occasions, from parties to everyday use. The bullet-shaped ice is not only visually appealing but also ideal for chilling beverages quickly without excessive dilution.

Both models incorporate a compact footprint, making them ideal for kitchens, home bars, or office spaces where space is at a premium. The units are easy to install and can simply be placed on a countertop, freeing you from the need for bulky freezer space dedicated to ice-making. Furthermore, the GXFM07HBL features a modern black finish, whereas the GXFM07HWW comes in a classic white finish, allowing you to choose the unit that best complements your decor.

Technologically, the GE GXFM07HBL and GXFM07HWW are designed with user convenience in mind. They offer intuitive controls that simplify the ice-making process. With just the press of a button, the machines start producing ice, and an indicator light alerts users when the ice bin is full or when water needs to be added. This ensures optimal operation without any guesswork.

In terms of energy efficiency, both ice makers are designed to consume minimal power, making them eco-friendly choices for your home or office. The units are equipped with a robust, self-cleaning function that simplifies maintenance and enhances longevity. Regular cleaning helps prevent limescale build-up and keeps the ice fresh and pure.

Ultimately, the GE GXFM07HBL and GXFM07HWW ice makers are excellent options for anyone seeking a reliable, stylish, and efficient solution for ice production. With their combination of modern design, ease of use, and high output, these models stand out as must-have appliances for enhancing your beverage experiences, catering events, or simply accommodating everyday ice needs.
Top Page Image Contents