Nortel Networks 4050 manual Modifying Ldap configuration settings using the CLI

Authentication menu commands — LDAP

menu.

Figure 57

Figure 57 shows sample output for the LDAP method for the /cfg/domain 1/aaa/auth <auth ID> command and commands on the Authentication

252Chapter 6 Configuring authentication

>>Main# /cfg/domain 1/aaa/auth

Enter auth id: (1-63) 3 Creating Authentication 3

Select one of radius, ldap, or local: ldap

Auth name: ldap

Entering: LDAP settings menu

Entering: LDAP servers menu

IP Address to add: <IPaddr> Port (default is 389): Leaving: LDAP servers menu

Search Base Entry: <search base entry>

Group attribute name: <attribute>

User attribute name: <attribute>

isdBindDN: <DN>

isdBindPassword: <password> Enable LDAPS (true/false): Leaving: LDAP settings menu

----------------------------------------------------------

[Authentication <auth ID> Menu]

type	- Set authentication mechanism
name	- Set auth	name
display	- Set auth	display name
domain	- Set windows domain for backend single sign-on
ldap	- LDAP settings menu
adv	- Advanced	settings menu
del	- Remove Authentication

>> Authentication 3#

Modifying LDAP configuration settings using the CLI

To modify settings for the authentication method itself, see “Configuring authentication methods using the CLI” on page 239.

To modify settings for the specific LDAP configuration, use the following command:

/cfg/domain 1/aaa/auth #/ldap

320818-A