Nortel Networks 4050 manual Viewing alarm events using the CLI, Info/events followed by

666Chapter 13 Viewing system information and performance statistics

/info

followed by:

events

logs

Accesses the Events menu, in order to view and download active alarms and logged events (see “Viewing alarm events using the CLI” on page 666).

Accesses the Logs menu, in order to view and download log files (see “Viewing log files using the CLI” on page 667).

Viewing alarm events using the CLI

To view active alarms, use the following command:

/info/events

The Events menu displays.

The Events menu includes the following options:

/info/events followed by:

alarms	Displays all alarms in the active alarm list, by their main
	attributes: severity level, alarm ID number, date and
	time when triggered, alarm name, sender, and cause.
	To alert the operator at system logon, a notice is
	displayed if there are active alarms.
	Alarms are also sent as syslog messages.
download <protocol>	Transmits the event log file from the Nortel SNAS 4050
<server> <filename>	cluster to a file on the specified TFTP/FTP/SFTP file
	exchange server. You are prompted to provide the
	following information:
	• protocol is the export protocol. Options are
	tftpftpscpsftp. The default is tftp.
	• server is the host name or IP address of the
	server.
	• filename is the name of the destination log file
	on the file exchange server.

320818-A