Nortel Networks 4050 manual Ldap menu displays Ldap menu includes the following options

Chapter 6 Configuring authentication 253

The LDAP menu displays.

The LDAP menu includes the following options:

/cfg/domain 1/aaa/auth #/ldap followed by:

servers	Accesses the LDAP servers menu, in order to manage
	the external LDAP servers configured for the domain
	(see “Managing LDAP authentication servers using the
	CLI” on page 256).
searchbase <DN>	Specifies the Distinguished Name (DN) that points to
	one of the following:
	1. the entry that is one level up from the user entries
	For example, if the searchbase value is set to:
	ou=People,dc=bluetail,dc=com
	authentication will be performed against a DN that
	corresponds to:
	uid = <user>, ou = People, dc = bluetail, and dc =
	com
	where uid is an example of a user attribute, ou =
	organization unit, and dc = domain component.
	Do not use the isdbinddn and isdbindpas
	commands.
	2. if user entries are located in several places in the
	LDAP Dictionary Information Tree (DIT), or if the
	client’s portal logon name is different from the user
	record identifier (RDN), the position in the DIT from
	where all user records can be found with a subtree
	search
	The isdbinddn and isdbindpas parameters
	are required so that the Nortel SNAS 4050 can
	authenticate itself to the LDAP server, in order to
	search the DIT.
groupattr <names>	Specifies the LDAP attribute that contains the names of
	the groups. The group names contained in the LDAP
	attribute must be defined in the Nortel SNAS 4050
	domain (see “Configuring groups using the CLI” on
	page 198).
	To specify more than one group attribute name, enter
	the names separated by a comma (,).

Nortel Secure Network Access Switch 4050 User Guide