Nortel Networks 4050 manual Variables

Appendix A CLI reference 811

•255.255.255.0 it can also be expressed as 24

•255.255.255.255 it can also be expressed as 32

Variables

You can use variables in some commands and features in the Nortel SNAS 4050 software.

TIP: Variables included in links are URL encoded. Variables included in static texts are not URL encoded.

Table 181 describes variables and their use.

Table 181 Variables

Variable	Use
<var:user>	Expands to the user name specified when the user logged on to the domain.
<var:password>	Expands to the password specified when the user logged on to the domain. .
<var:group>	Expands to the group to which the logged on user is a member.
<var:portal>	Expands to the Portal IP address. TIP: The variable can be included in redirect
	URLs.
<var:domain>	Expands to the domain name specified for the authentication method of the logged
	on user.
<var:method>	Expands to the access protocol used (http or https).
<var:sslsid>	Expands to the SSL session ID in binary format.
<md5:...>	Expands the variable or variables (for example, <md5:<user>:<password>>) and
	computes an MD5 checksum which is Base 64 encoded. TIP: Can be used when
	creating dynamic HTTP headers.
<base64:...>	Expands the variable or variables (for example, <base64:<user>:<password>>)
	and encodes them using Base 64. TIP: Can be used when creating dynamic HTTP
	headers.
<var:tgFailureReason>	Expands to the TunnelGuard rule expression and the TunnelGuard rule comment
	specified for the current SRS rule when a TunnelGuard check has failed.
<var:tgFailureDetail>	Expands to the software definition comment specified for the current SRS rule,
	including additional failure details, when a TunnelGuard check has failed.
Operator-defined	Custom variables can be created to retrieve the desired values from RADIUS and
variables	LDAP databases.

Nortel Secure Network Access Switch 4050 User Guide