Marantz BD8002 manual Others, Troubleshooting, English

ENGLISH

Others

Others

Troubleshooting

If the unit does not perform properly when operated as instructed in this Operating Instruction, check the unit, consulting the following checklist.

Problem	Solution		Page
No power	- Check if the AC cord is properly connected.		–
	- Unplug the AC cord once, and wait for 5-10 seconds and then plug it		–
	in again.
No sound or picture	- Check if the connected display device is turned on.		–
	- Check the HDMI connection. (Check the status of the HDMI related	10
	indications.)
	- Check the RCA audio/video cable connections.	10, 13
	- Check if the pure direct mode is set to “Video Off” or “All Off”. If it is	23
	the case, set it to “Display Off” or “Normal”.
	- Check whether the connected display device or other device supports	12
	HDCP. (This unit will not output a video signal unless the other device
	supports HDCP.)
	- Check whether the output format of this unit (HDMI FORMAT)	10,30,31
	matches the supported input format of other connected device.
	- Check if the “HDMI Deep Color” is set to “Auto”. If it is the case, set it to	31
	“Off”.
	- Check if the “I/P Direct” is set to “On”. If it is the case, set it to “Off”.	31
Distorted picture	- Sometimes a small amount of picture distortion may appear.		–
	This is not a malfunction.
	- Connect this unit directly to the TV. If the RCA audio/video cables are	10
	connected to a VCR, pictures may be distorted due to the copy
	protection system.
Completely distorted picture or	- Make sure the disc is compatible with this unit.	4
black/white picture with BD/DVD
No sound or distorted sound	- Adjust the volume.		–
	- Check that the speakers are connected correctly.	10,12,13
	- Check the HDMI connections.	10
	- Check the “Audio” settings.	32,33
Picture freezes momentarily during	- Check the disc for fingerprints/scratches and clean with a soft cloth	4
playback	wiping from center to edge.
	- Clean the disc.	4
Disc cannot be played back	- Clean the disc.	4
	- Ensure the disc label is facing up.	14
	- Check if the disc is defective by trying another disc.		–
	- Cancel the ratings control or change the control level.	36
	- Insert a correct disc that can be played back on this unit.	4

Problem	Solution		Page
Buttons do not work or the unit	- To completely reset the unit, unplug the AC cord from the AC outlet		–
stops responding	for 5-10 seconds.
The unit does not respond to some	- Operations may not be permitted by the disc.	14
operating commands during	Refer to the instructions of the disc.
playback
The unit cannot read BD/DVD/CD	- Condensation ? (Let sit 1 or 2 hours)	3
	- You are attempting to play a disc other than one with one of the	4
	marks on page 4.
	- Wipe the dirt off the disc or replace the disc.	4
Angle does not switch	- The angle cannot be switched for BD/DVD which do not contain	19
	multiple angles. In some cases multiple angles are only recorded for
	specific scenes.
Playback does not start when the	- Check the “Ratings” setting.	36
title is selected
The password for rating level has	- Enter the default password “4737”, then your forgotten password will	36
been forgotten	be cleared.

Note

•Some functions are not available in specific modes, but this is not a malfunction. Read the description in this Operating Instructions for details on correct operations.

•Some functions are prohibited on some discs.

SD Memory Card cannot be read.	- The format of the card does not match to this unit or the card is not	–
	compatible.
No return to start-up screen when	- Reset this unit by turning it off, then on again.	–
disc is removed

The unit does not respond to the remote control

- Aim the remote control directly at infrared sensor window on the front	6
of the unit.
- Reduce the distance to infrared sensor window.	–
- Replace the batteries in the remote control.	6
- Re-insert the batteries with their polarities (+/- signs) as indicated.	6
- Make the signal code of the remote control match to the signal code	6
of the unit.

38

ENGLISH