Playback

Adjusting the Picture

BD-V BDAV DVD-VDVD-VR DivX®

You can adjust the picture quality and store the setting you have adjusted on memory 1-5.

1)During playback, press [MODE] repeatedly until the picture adjustment menu appears.

• Picture adjustment menu:

Memory 1

2)

Use [U / V] to select a memory from “Memory 1” to

 

“Memory 5” to store your setting, then press [ENTER].

3)

Use [U / V] to select a item to be adjusted, then use [Y / Z]

 

to adjust the setting.

 

 

 

 

 

 

 

 

 

Memory 1

14.V_Position Control

0

 

 

 

1.Contrast

+1

 

 

 

2.Brightnes

0

 

 

• To reset to the default setting, press [RETURN], use [U / V]

 

to select “STD”, then press [ENTER].

 

 

Gamma correction

To adjust “Gamma Correction”, after selecting the item at step 3, press [ENTER], then use [U / V / Y / Z] to adjust the setting.

In the graph of gamma correction, the horizontal axis indicates the brightness level of the image that is recorded on the disc, and the vertical axis indicates the brightness level of the image when it is output from this unit.

Memory 1

 

 

 

 

5. Gamma Correction

 

 

 

 

GO : 0 2 4

255

0

0255

When bright points of the disc side are adjusted to the “dark” of the output side, the fine parts of the bright portion that normally become hard to see, become an easily discerned image.

ENGLISH

Playback

Memory 1

 

 

 

 

5. Gamma Correction

 

 

 

 

GO : 0 2 4

255

0

0255

When dark points of the disc side are adjusted to the “bright” of the output side, the fine parts of the dark portion that normally become hard to see, become an easily discerned image.

4) Press [RETURN] repeatedly to exit.

Note

This setting is not effective for the picture output from VIDEO OUT and S VIDEO OUT jack.

The setting remains even you turn off the unit.

You cannot adjust the setting during the rapid playback, or when the pure direct is set to “Video Off” or “All Off”.

DNR can also be adjusted by pressing <VIDEO NR (NOISE REDUCTION)> on the front panel. (refer to page 7.)

List of picture adjustment item/values

 

Item

Description

Adjustment range (default)

1.

Contrast

Adjusts the difference between the bright and dark parts of the picture.

-6 to +6 (0)

2.

Brightness

Adjusts the brightness of the picture.

0 to +12 (0)

3.

Enhancer*1

Strengthens the contours of the picture.

0 to +11 (0)

4.

DNR*1

Reduces the overall level of noise on the picture.

Off to +3 (Off)

5. Gamma Correction

Detailed adjustment of the picture’s brightness.

16 to 235 (G0=24/G1=32/G2=48/G3=64/ G4=80/G5=96/ G6=128/G7=160/ G8=192/G9=224)

6.

Sharpness Mid*2

Adjusts the sharpness of the picture for the medium frequency range.

-6 to +6 (0)

7.

Sharpness High*1

Adjusts the sharpness of the picture for the high frequency range.

-6 to +6 (0)

8.

Hue*2

Adjusts the balance between the green and red.

-6 to +6 (0)

9.

White Level

Adjusts the white level.

-5 to +5 (0)

10.Black Level*1

Adjusts the black level.

-5 to +5 (0)

11.Chroma Level

Adjusts the density of the colors.

-6 to +6 (0)

12.Setup Level

Makes the black parts of the pictures brighter.

0 IRE : Shows the original picture as recorded.

 

 

 

7.5 IRE : Makes the dark parts brighter.

 

 

 

(7.5 IRE)

 

 

 

13.H_Position Control*1

Adjusts the left/right position.

-7 to +7 (0)

14.V_Position Control*1

Adjusts the top/bottom position.

-7 to +7 (0)

*1 Effective for the video signal of COMPONENT VIDEO OUT (except for 480i) and HDMI OUT jacks. *2 Not effective for the video signal of HDMI OUT jack.

24

ENGLISH

Page 27
Image 27
Marantz BD8002 manual  Gamma correction, Adjusting the Picture, List of picture adjustment item/values