Marantz BD8002 manual Digital Out Setting, Drc

ENGLISH

Function Setup

Setting items	Options
7.1ch Audio Out	Multi Channel*:
Sets the audio format for the audio	The multi-audio signals are output from the 7.1ch
output from the 7.1ch AUDIO OUT.	AUDIO OUT. Refer to pages 34-35 for setting options.
	2 Channel:
	Down-mixed 2-channel audio signals are output from
	the 7.1ch AUDIO OUT jacks.
Down Sampling	On:
Sets the digital audio output when	LPCM signals are converted to 48 kHz for output.
playing BD or DVD recorded in	• Set to “On” when using digital connections to an AV
LPCM.	amplifier that is not compatible with sampling
	frequencies of 96 kHz.
	Off*:
	For BD or DVD recorded in LPCM without copyright
	protection, 2-channel audio signals up to 192 kHz are
	output as LPCM signals with no conversion.
DRC	Auto*:
Sets whether to compress the	When the discs that are recorded in the Dolby TrueHD
range of sound volume (Dynamic	format is in playback, this unit detects DRC setting of
Range Control) when Dolby Digital,	the disc and set the DRC setting of this unit to “On” or
Dolby Digital Plus or Dolby TrueHD	“Off” automatically.
audio is played back.
	Off
	On
Source Direct	On:
Sets to output the audio without	Select this to output the audio without any effect of
adding speaker settings to the	speaker setting.
audio signals from the disc.
	Off*:
	Select this to output the audio with the effect of
	speaker setting.
Bass Enhancer	On:
Sets whether to output the	Audio signal will be output from the subwoofer. (Please
subwoofer when playing back	set “Subwoofer” in the “Speaker Configuration” to
content that does not have LFE	“On”.)
(Low Frequency Effect) signal.
	Off*:
(e.g. content with only 2 channel
	No audio signal will be output from the subwoofer.
audio signal.)
Audio Adjust	0ms to 200ms (0ms*)
Sets the amount of the delay time	The audio signal will be delayed for the amount of time
between the picture and audio	you set.
signal.

Function Setup

Setting items	Options
Virtual Surround	Off*:
Sets to create a surround effect in	Virtual surround is set to off.
a system with 2 speakers
connected.
	1:
	A natural surround effect in a system with 2 speakers
	connected.
	2:
	A stronger surround effect in a system with 2 speakers
	connected than "1".

•Settings with (*) are the default.

•Quick menu consists of the setting menus frequently used, and they are accompanied with mark.

•If you set “Source Direct” to “On”, “HDMI Audio Out” to “HDMI 2ch” or “7.1ch Audio Out” to “2 Channel”, “Bass Enhancer” is not available.

•Under following circumstances, “HDMI Multi(Normal)”, “HDMI Multi(LPCM)” and “HDMI 2ch” is not available.

-HDMI cable is not connected to HDMI OUT jack.

-Connected display device is off.

-Connected display device is not compatible with audio output.

•When “Source Direct” is set to “On”, “Bass Enhancer” and “Speaker Configuration” are not available.

Digital Out Setting

When the “Audio Mute” is selected in “HDMI Audio Out” setting, audio signal of the HDMI is muted and the audio signals output from DIGITAL OUT changes depending on the “Digital Out” setting.

<“Digital Out” setting>

Audio A HDMI Audio Out A Audio Mute

Bitstream*:

When playing back discs recorded in Dolby Digital, Dolby Digital Plus, Dolby TrueHD, DTS or DTS-HD, the corresponding core stream (Dolby Digital or DTS) are output.

LPCM:

LPCM signal will be output from DIGITAL OUT.

•This setting is not effective when the HDMI audio signal is output.

•When both HDMI and DIGITAL OUT is connected to other devices, the audio signals currently output from the HDMI OUT will be output from the DIGITAL OUT jack as well, except that Dolby Digital signal will be output instead of Dolby Digital Plus and Dolby TrueHD, and DTS signal will be output instead of DTS-HD.

•When “BD Audio Mode” is set to “HD Audio Output”, Dolby Digital Plus, Dolby TrueHD, or DTS-HD will be output as core stream (Dolby Digital or DTS). If the audio source is Dolby Digital, DTS, or LPCM, the same audio stream type set in the “HDMI Audio Out” will be output. (When outputting Multi LPCM from HDMI OUT, 2ch Downmix LPCM will be output from DIGITAL OUT.)

•When “BD Audio Mode” is set to “Mix Audio Output”, the audio output from DIGITAL OUT will follow the setting in the “HDMI Audio Out”. (When outputting Multi LPCM from HDMI OUT, 2ch Downmix LPCM will be output from DIGITAL OUT.)

33

ENGLISH