Audio signals output from HDMI OUT, Audio Setting

HDMI Output Mode and Actual Output Signals

ENGLISH

Connections

HDMI Output Mode and Actual Output Signals

Press <HDMI (RESOLUTION)> to select the HDMI output mode. HDMI video resolution changes as following.

Front Panel Display HDMI Video Resolution

480 Progressive

Press <HDMI (RESOLUTION)>

720 Progressive

Press <HDMI (RESOLUTION)>

1080 Interlaced

Press <HDMI (RESOLUTION)>

1080 Progressive

Press <HDMI (RESOLUTION)>

1080 Progressive 24 frame

Press <HDMI (RESOLUTION)>

Note

•You can change the HDMI output mode with <HDMI (RESOLUTION)> during playback as well.

•After you select a HDMI output mode, the supported HDMI video resolution will be output.

•Video and audio signals may be distorted temporarily when switching to/from the HDMI output mode.

•You can also change the HDMI output mode from “HDMI Video Resolution” in the “Video” menu on the setup menu. In this menu, you can confirm what HDMI video resolutions are supported by connected display device. Refer to page 31.

•In order to get natural and high quality film reproduction of 24-frame film material, use HDMI cable (High Speed HDMI cable is recommended) and select “1080p24” if the connected display device is compatible with 1080p24 frame input.

•For BD, with the 1080p24 frame, you can enjoy natural and high quality film production of 24- frame film material. If the connected display device is not compatible for 1080p24 frame, you cannot set “HDMI Video Resolution” to “1080p24”.

•Even when “HDMI Video Resolution” is set to “1080p24”, if “I/P Direct” is set to “Off” or for playing back DVD, a video resolution supported by the disc and the display device will be output instead of 1080p24 frame.

•There is no output from VIDEO OUT, S VIDEO OUT and COMPONENT VIDEO OUT jacks when you play back a BD that recorded 24-frame film material.

•COMPONENT VIDEO OUT jacks may not output any signals when you set “HDMI Select” to “RGB” or “HDMI Deep Color” to “Auto”.

•When both HDMI OUT and COMPONENT VIDEO OUT jacks are connected to display device, and HDMI output is “1080p”, the video signal may not be output properly from the COMPONENT VIDEO OUT jacks.

•If you change the HDMI output mode with <HDMI (RESOLUTION)> during BD playback, it may take 2 to 10 seconds to change, and while changing the HDMI output mode, sound and video will be stopped.

•“HDMI Deep Color” is available only when the display device is connected by HDMI cable and supports HDMI Deep Color.

•For “Auto” in “HDMI Deep Color” and for “1080p” or “1080p24” in “HDMI Video Resolution”, using the High Speed HDMI cable is recommended.

Connections

Audio Setting

When using HDMI connections make the “HDMI Audio Out” settings in the “Audio” menu on the setup menu according to the specifications of the device or monitor to be connected.

Device to be connected	“HDMI Audio Out” setting	Output HDMI audio signal
Device compatible with DTS,	HDMI Multi(Normal)	Dolby Digital, Dolby Digital Plus,
DTS-HD, Dolby Digital, Dolby		Dolby TrueHD, DTS, or DTS-HD
Digital Plus or Dolby TrueHD		bitstream are output from HDMI
decoding		OUT. Make the speaker settings on
		the connected AV amplifier, etc.
Device compatible with 3 or	HDMI Multi(LPCM)	Multi-channel audio signals are
more channels of audio inputs		output from the HDMI terminal.
(not DTS, DTS-HD, Dolby Digital,		Make the speaker settings with the
Dolby Digital Plus or Dolby		speaker setting items appear after
TrueHD compatible)		you select “HDMI Multi(LPCM)”.
		Refer to page 32.
Device compatible with	HDMI 2ch	Down-mixed 2-channel audio
2-channel audio input or device		signals are output from HDMI
not compatible with audio input		OUT.
HDMI connection to a display	Audio Mute	HDMI audio will be muted, and
device, and digital audio		Dolby Digital/DTS bitstream or
connection (coaxial/optical) to		LPCM will be output from DIGITAL
an AV amplifier.		OUT depending on the “Digital
		Out” setting. Refer to page 12.