Marantz BD8002 Connection to a Device with 2-channels of Analog Audio Inputs, Stereo component

ENGLISH

Connections

Connection to a Device with 2-channels of Analog Audio Inputs

audio	Stereo component	RCA audio cable
	AUDIO IN	this unit
	L
	R

Supplied cables used in this connection are as follows:

• RCA audio cable (L/R) x 1

Note

•When connecting to a 2-channel audio stereo device, use the 2ch AUDIO OUT jacks. If the 7.1ch AUDIO OUT jacks are used, set “7.1ch Audio Out” in the “Audio” menu to “2 Channel” (Refer to page 33). For software recorded in multi-channel, analog signals that have been down-mixedinto 2 channels are output. (For sources which are prohibited from down-mixing, only the FL/FR signals are output.)

Surround Connections to a Device with 7.1/5.1-channels of Analog Audio Inputs

Analog 7.1ch/5.1ch audio signals can be output from 7.1ch AUDIO OUT jacks.

audio

AV amplifier

this unit

FRONT

L

R

SURROUND

L

R

SURROUND

BACK

L

R

CENTER

SUB-

WOOFER

Connections

Note

•If you connect to 5.1-channel surround system, do not connect to SBR/SBL (surround back R/L) jacks, then set “Surround Back” in “Speaker Configuration” to “None”.

Connecting the AC cord

After you made all necessary connections, connect the AC cord to the AC IN. Then connect the AC cord to the AC outlet.

AC outlet

AC 120V, 60 Hz

AC cord

Supplied cables used in this connection are as follows:

• AC cord x 1

Note

• Insert the plugs securely. Incomplete connections will result in the generation of noise.

Supplied cables used in this connection are as follows:

• RCA audio cable (L/R) x 1

Please purchase the rest of the necessary cables at your local store.

13

ENGLISH