AT&T DS1/DMi/ISDN-PRI manual Name, Network Parameterized Feature Facility, Coding Value Binary

						ADMINISTRATION OPTIONS AND REQUIREMENTS — GENERIC 2						7-99
					TABLE 7-11. Network		Services/Network		Features
			NAME			Network	Parameterized (0)			Feature (0)	Facility
						Service	or			or	Coding
						Value	Binary (1)			Service (1)	Value
	Out-WATS			band		33-288	0			1	1
	SID	preferred				320	1			0	1
	ANI	preferred				320	1			0	1
	SID only					322	1			0	3
	ANI only					323	1			0	4
	Operator handled					324	1			0	5
	Pre-subscribed					325	1			0	6
	CC	operator
	SDN					352	1			1	1
	MEGACOM 800				service	353	1			1	2
	MEGACOM					353	1			1	3
	In-WATS					353	1			1	4
	WATS		maximal			353	1			1	5
	subscribed			band
	ACCUNET			switched		353	1			1	6
	digital		services
	Long distance service					353	1			1	7
	Caller		data			8	0			0	8
Field 2			Assigns whether the service/feature is binary (1)					or parametrized (0). As an
			option, fields 5-11 may contain additional defining parameters (refer to table 7-11,
			Network		Services/Network Features). However,			even though a service/feature				may

be defined as parametrized, it is generally not required that fields 5 through 11 be translated.

	For a binary service/feature, fields 5-11 cannot be translated.
Field 3	Assigns whether the facility coding value represents a feature or a service, refer to
	table 7-11,Network Services/Network Features. Field encodes	and their descriptions
	are:
	0 Feature
	1 Service
Field 4	Assigns the facility coding value (refer to table 7-11, Network	Services/Network
	Features). Field encodes and their descriptions are:
	● Dash (–),not applicable
	● Numbers (0 through 31)
Fields 5-11	There are no default values.