AT&T DS1/DMi/ISDN-PRI Proc Chan, Chan Priority, Interface Links ISDN-PRI Applications

7-126ADMINISTRATION OPTIONS AND REQUIREMENTS — GENERIC 1

		PROCESSOR		CHANNEL ASSIGNMENT		Page 1 of 4
Proc		Interface			Remote
Chan	Appl.	Link	Chan	Priority	Proc Chan	Machine-ID
1:	______	_	_ _	____	_ _	_ _
2:	______	_	_ _	____	_ _	_ _
3:	______	_	_ _	____	_ _	_ _
4:	______	_	_ _	____	_ _	_ _
5:	______	_	_ _	____	_ _	_ _
6:	______	_	_ _	____	_ _	_ _
7:	______	_	_ _	____	_ _	_ _
8:	______	_	_ _	____	_ _	_ _
9:	______	_	_ _	____	_ _	_ _
10:
	______	_	_ _	____	_ _	_ _
11:	______	_	_ _	____	_ _	_ _
12:	______	_	_ _	____	_ _	_ _
13:	______	_	_ _	____	_ _	_ _
14:	______	_	_ _	____	_ _	_ _
15:	______	_	_ _	____	_ _	_ _
16:	______	_	_ _	____	_ _	_ _

	Figure 7-67.Processor Channel Assignment Screen
Proc Chan	This is a display only field. You can select any of the following processor channels
	(5-7, 9, 11-58, 60-64); conditional that the identified channel is not already used.
Appl	This field should be administered isdn for ISDN-PRI applications.
Interface	Permitted encodes are 1 through 8. The number selected should match the number
Link	previously administered on the PROCESSOR INTERFACE DATA MODULE screen.
Interface	Not used in Generic 1.
Chan
Priority	Servicing the D-channel is a high priority issue. Therefore, h, (for high) should be
	administered for all ISDN-PRI applications.

For ISDN-PRI applications the other fields should remain blank.

Interface Links — ISDN-PRI Applications

This screen identifies the interface link and enables the link. Figure 7-68,lnterface Links Screen, depicts this procedure.