AT&T DS1/DMi/ISDN-PRI manual Administration Requirements, Tac

ADMINISTRATION REQUIREMENTS A-3

			TRUNK		GROUP			Page 1 of	5
Group	Number: (number		assigned)		Group	Type:	tie	SMDR Reports?		y
Group Name: MEGACOM			800	COR: 1			TAC:	189
Direction:		1 -way in		Outgoing Display?		y	Data	Restriction?		n
Dial	Access?	y		Busy Threshold:		60	Night Service:		____
Queue	Length:	0	Internal		Alert? n	Incoming Destination:			____
Comm Type:		voice

TRUNK	PARAMETERS
Trunk	Type(in/out):		wink/auto		Incoming	Rotary Timeout(sec.): 5
Outgoing Dial Type:			_______		Incoming Dial Type:			tone
						Disconnect Timing(msec):			500
Digit		Treatment:	__________					Digits:	_____
	Used for DCS?		n	PBX ID: 1
ACA		Assignment?	n		Long		Holding Time(hours):		1
Short Holding Time(secs.):				10	Short		Holding	Threshold:	15
Baud Rate:	______			Synchronization:		______		Duplex:	_____
Incoming Dial Tone?			_				Maintenance Test?		y
Answer Supervision Timeout:				___		Suppress # Outpulsing?			n

Figure A-3.Trunk Group Screen, Page 1 (MEGACOM 800)

At the 4ESS, and for MEGACOM 800 DNIS service applications, this trunk type is called PBX (1-way incoming trunks). At the 4ESS, these PBX trunk types are translated for DTMFWK type signaling. The Digits and Digits Treatment fields may or may not be translated depending on the local numbering plan and other addressing requirements or restrictions for a 4ESS toll office. Generally, the lncoming Destination field will be administered with either a 4- or 7-digit number, or no number at all. Exact details depend on how the service is engineered from the toll office and numbering plan limitations of the customer premises switch.